STM32
-
uFlex GPSDO
Het is vervelend als een hele rij RF-meetinstrumenten in de shack - signaalgenerators, frequentietellers, spectrumanalyzers - aanwijzingen afleveren die onderling van elkaar verschillen. Een ontvanger, afgestemd op WWV, kan als scheidsrechter dienen, maar het blijft storend om fouten tussen al deze apparaten te moeten verdisconteren.Zoals meestal het geval is, beschikken ook mijn instrumenten over een externe 10 MHz referentie-ingang. Het was een oude wens van mij om één nauwkeurige frequentiebron centraal te stellen. Nu is er voor redelijk weinig geld veel kant-en-klaar spul te koop, maar vaak toch met een separate distributieversterker, onduidelijke specificaties en een vormgeving die mij minder aanstaat. Dan toch liever zélf maar wat in elkaar gezet.
Over de bouw van dat apparaat gaat dit topic.
-
uFlex GPSDO
It's frustrating when a whole row of RF measuring instruments in the shack - signal generators, frequency counters, spectrum analyzers - deliver readings that differ from each other. A receiver tuned to WWV can serve as a referee, but it's still annoying to have to account for discrepancies between all these devices. As is usually the case, my instruments also have an external 10MHz reference input, and it has long been my wish to use a single accurate frequency source as the central reference. Now, for a reasonable price, you can buy plenty of ready-made equipment, but often it comes with a separate distribution amplifier, unclear specifications, and a design I don't particularly like. So, I preferred to build something myself.
This topic is about building that device.
-
AIS-receiver with two Silabs Si4362 | Si4463 chips and STM32 processer
The AIS receiver described in this article is an update to an earlier version that revealed some issues in the print layout. Since I had to place an order for some other PCB projects anyway, I let this corrected version run along and also took the opportunity to add an extra Si4362 (or Si4463) to the design for dual channel simultaneous AIS-receipt.
-
AIS-receiver with Silabs Si4362 | Si4463 radio chip and STM32 processor
About seven years ago I designed an information system for law enforcement along Europe's waterways and seaports: AQUATRACK. I then equipped the remote receiving stations with a AIS receiver OEM module from SRT Marine Systems. An excellent product. The phenomenon of AIS fascinated me so much that I was curious if I could make a building block as a hobby project for a fraction of the cost. A search on the internet led me to a nice initiative, the dAISy project which turned out to be based on an EZRadioPRO ISM Band receiver chip: the Si4362 from Silicon Labs and a simple 8-bit MSP430 processor from Texas Instruments. Because I am a little more comfortable on ARM processors and also have the development tools for it, I'd rewrote the source code for a Cortex M0 chip, the STM32F042K6 from STMicroelectronics to be precise. I also made some print circuit board designs for this.
-
AIS-ontvanger met twee Silabs Si4362 | Si4463 radio chips en STM32 processor
De in dit artikel beschreven AIS-ontvanger is een update van een eerdere versie waar enkele problemen in de printlay-out bij aan het licht zijn gekomen. Omdat ik toch een bestelling moest plaatsen voor een aantal andere PCB-projecten, heb ik deze gecorrigeerde versie mee laten lopen en meteen ook maar van de gelegenheid gebruik gemaakt om een extra Si4362 (of Si4463) aan het ontwerp toe te voegen voor tweekanaals simultaan AIS-ontvangst.
-
AIS-ontvanger met Silabs Si4362 | Si4463 radio chip en STM32 processor
Een jaar of zeven terug heb ik een informatiesysteem ontworpen voor de wetshandhaving en opsporing langs de Europese waterwegen en zeehavens: AQUATRACK. De remote ontvangstsstations hiervan heb ik toen uitgerust met een OEM AIS ontvanger module van SRT Marine Systems. Een uitstekend product. Het fenomeen AIS boeide mij dermate dat ik benieuwd was of ik als hobby project voor een fractie van de kosten een soortgelijke bouwsteen kon maken. Een speurtocht op internet leidde me naar leuk initiatief, het dAISy-project. dat gebaseerd bleek op een EZRadioPRO ISM Band ontvanger chip: de Si4362 van Silicon Labs en een simpele 8 bits MSP430 processor van Texas Instruments. Omdat ik zelf meer thuis ben op ARM-processors en daar ook de ontwikkel tools voor heb heb ik de broncode herschreven naar een Cortex M0 chip; de STM32F042K6 van STMicroelectronics om precies te zijn. Hier heb ik vervolgens ook wat printontwerpen voor gemaakt.